Sell fox skins. Purchase of fur and fur products. Types of fur products
Before you bring it to us for dressing, remove FAT and MEAT from the skins, and then salt the skin with 2 packages of fine salt and put it NOT in a plastic bag. Then your skins will be perfect!
Fur is obtained in different ways: hunting, breeding, buying, etc. However, in order for these skins to be able to realize your ideas, they need to be dressed. Our factory provides dressing services. We have been serving both individuals and taxidermy studios for 40 years. The quality of our skins allows us to create from them not only taxidermy products, but also perfectly suitable for tailoring. With the help of German technology of dressing and chemistry, your fur will last more than one year. We care about the quality of our products.
For those who get their fur through hunting, we advise you to take a look at the "Tips" section. Remember, the quality of the skins depends not only on us, but also on you!
Skins are accepted for dressing in wet-salted, fresh-salted and dry form.
The cost of dressing hides and furs
Changes have been made to dressing prices:
- 1st column - for fresh-dry and damp-salted skins, defatted according to GOST;
- 2nd column - for skins with fat, meat, bones, cartilage, without salt or frozen;
This measure was introduced due to the fact that the brought raw materials are not processed properly, which increases the dressing process, time and chemistry.
Factory dressing and processing
Mankind has always hunted. From the very moment the first weapon appeared, the first trophies appeared. Ancient people hunted not only for food, animal skins perfectly protected the body from the cold. How skins were processed in primitive times, and what tools of production were used for this, is an interesting question. But let's leave it for historians, and let's talk about modern technologies for dressing skins.
The modern factory "Lynx" invites everyone who is not indifferent to natural fur to cooperation. Our diversified enterprise specializes in working with the fur of fur animals. The cost of dressing fur in our factory is available to everyone who is interested in this service. The high quality of work is ensured by the presence of the following characteristics in the arsenal of our company:
- Proven and reliable fur processing equipment;
- Well-established technologies for dressing skins, which allow to preserve the quality characteristics of the skin and fur as much as possible;
- Many years of experience in our masters in the dressing and processing of fur and skins;
- Well-coordinated team of professionals of different specializations.
The quality of the dressing of skins depends on their further fate. Only elastic, soft and light skins will become a source of inspiration for designers. They are demonstrated by the world's leading podiums and the most famous women proudly drape them over their shoulders.
Trophies in the modern world
Hunting for men is not only entertainment and an opportunity to escape from the gray everyday life. Hunting is an opportunity to return home as an earner, with a real trophy. The fur-bearing animal is one of the prey that you can be proud of. A properly dressed skin, whether it be a red fox or a fluffy raccoon, can also be a great gift. Products decorated with natural fur are always beautiful, stylish, elegant and warm, which is important for our climate zone. Regardless fashion trends, at all times, cold is the main incentive for hunting fur-bearing animals and breeding them on an industrial scale.
Factory "Lynx" has enough capacity to provide skinning services on an industrial scale. For supporting high standards quality and compliance modern requirements fur factory "Lynx" uses special technological processes, the observance of which is not allowed in living conditions both in terms of human security and environment. Poisoning and injury are possible, while the quality of the dressing will still not respond.
It is important to understand that artisanal fur raw materials cannot meet modern quality and safety standards for manufactured products, and their service life is significantly lower than that of fur tanned under industrial conditions.
What makes up the price?
The cost of dressing skins in Malakhovka at the Lynx fur factory, it depends mainly on how competently the customer approached the issue of preserving the skins, whether he processed them correctly initially and how much he kept before he brought them to the factory for dressing, so the price is affected by the type of fur raw materials.
It is recommended to carry out salting with natural fine salt (a couple of packs per skin), after removing fat and meat from them. It is recommended to store the skins without cellophane until delivery to the factory. The use of a plastic bag significantly reduces the quality of the skin after dressing.
The difference in the cost of incorrectly preserved skins can be up to 50% of the cost of correctly preserved fur raw materials.
Factory "Lynx" carries out dressing of skins in Moscow and the Moscow region quickly and with a guarantee of results. Finished skins can be used for various purposes.
The quality of processing of leather and animal skins is largely determined by a competent approach to conservation. It is recommended to deliver the skins to the factory in wet-salted, fresh-salted and dry form.
If you live in Zheleznodorozhny, it will take you only half an hour to get to our factory by car and use our professional services.
Among other things, in our factory you can order the following services:
- tailoring fur products according to individual design;
- taxidermy;
- for dyeing and shearing skins.
Outerwear made from valuable fur can help in solving financial problems. To do this, you can hand over a fur coat to fur pawnshops. This is a very affordable and profitable way to get cash.
Fur pawnshops in Moscow accept various fur products. These are mouton fur coats, and products from a scribe, sable, fox, chinchilla. Most Popular mink coat pawn shops. Here you can rent a fur coat, both from a traditional mink, and sheared and dyed.
Pledge of a fur coat in a pawnshop is carried out under certain conditions. The fur coat must be marketable, clean and undamaged. A specialist evaluates the fur product, checks the quality of the fur, the condition of the seams, and only after that a contract is concluded.
RENT THE FUR COAT TO THE PAWNSHOP
Only an adult person with a passport of a citizen of the Russian Federation can pawn or quickly sell a fur coat to a fur pawnshop.
By accepting a fur coat on bail, pawnshops guarantee their customers its safety from loss and damage. Fur coats are stored in special refrigerators connected to the alarm system, subject to a constant microclimate.
When choosing pawnshops that accept fur coats, be sure to familiarize yourself with the rules for storing fur products and check for insurance.
Fur pawnshops
It is profitable and safe to rent a fur coat to a pawnshop in Moscow, especially in the summer. You will not only receive additional cash on vacation, but ensure the quality and safety of your product.
It is very important to put a fur coat in fur pawnshops, especially if you prefer to wear other winter clothes, and just keep your fur coat idle.
The price of a fur coat in a pawnshop is set after an assessment by a specialist. At the same time, the price depends on the color of the fur, the length and quality of the product, the brand of the manufacturer and the age of the item. Fur appraisal and collateral is carried out in shops and pawnshops located at the following addresses.
More detailed information about pawnshops where fur coats are accepted can be found on our website.
It is customary to call furs the skins of fur-bearing animals - martens, foxes, minks, squirrels, lynxes, otters, ermine, raccoon, columns, muskrat, arctic fox, beaver, sable, etc. Fur is obtained by hunting or bred on fur farms.
There are two types of furs - spring and winter. Winter skins include those skins of animals that do not hibernate, and spring skins include animals that hibernate in winter and are rather difficult to hunt. The quality of wild furs is directly dependent on such characteristics as the thickness of the undercoat, hair height, softness, elasticity, shine, color and shade of the fur, thickness, density and strength of the leather tissue, size and weight of the skin, and the level of thermal protection. The listed properties are determined by the conditions and geographical area of habitat, the age of the fur animal, the time of year (when purchasing wild furs, we take into account all these factors). As a rule, habitat conditions are understood as a terrestrial, underground or amphibious way of life, and a geographical area is latitude (the more severe the winter in the region, the higher the quality of the furs). The skin of the animal acquires the highest quality after the completion of the molt.
Of course, such a pleasure cannot be cheap - we buy high-quality wild furs at appropriate prices.
Where are you from?
Historically, the main suppliers of wild furs are two countries - Russia and Canada. Northern maritime countries (Greenland, Norway, Russia) supply seals to the fur market. In the supply of such farm furs as fox and mink, the leaders are Scandinavia, the Netherlands, North America and, again, Russia. Breeding chinchillas on a global scale is carried out in Hungary and Mexico, astrakhan - in Namibia, Afghanistan. The best muton and the highest quality rabbit are found in Spain, and the best nutria usually come from Argentina. We buy expensive furs of excellent quality from these regions.
Greece and China are also the leaders in fur production today, and it is China that deserves special attention. Here, the lion's share of products marked, for example, with the Made in Italy label, is manufactured and then supplied to the world market. The number of Chinese factories and shops selling furs is growing rapidly - and although they buy wild furs, since they do not produce them themselves, the final products are not satisfactory. For a real price, you can also buy a fur coat in Greece - a quality product will most likely be sewn according to patterns in compliance with the technology of an Italian company.
Currently, the wholesale fur trade through which about 90% of the world's fur sales are carried out is the fur auctions Kopenhagen Fur (Denmark), Finnish Fur Sales (Finland), NAFA (Canada), American Legend (USA), Soyuzpushnina (Russia), Fur Harvesters (Canada) and Western Canadian Raw Fur Auction Sales (Canada).
We value each of our clients and are ready to provide you with services in accordance with the profile of our activities. The specifics of the company are fur skins and fur products. If you are interested in buying and working with wild furs, we will always be happy to help you.
Acceptance of raw materials. Whole skins are taken from the primary processing shop and counted by quantity, while halves and pieces are counted by weight. Received skins are examined from the wool and skin sides. The raw material to be rite is separated and dressed. The duration of technological operations for processing skins before conservation, including acceptance, should not exceed 3 hours for skins of cattle, horses and camels from the moment of removal from carcasses, for skins of pigs and sheepskins - 2 hours.
Rite of raw materials. The rite consists in the removal of cuts of meat, fat, blood clots, bulk and other weighting agents from the skins.
The bulk is softened before being removed from the skins of cattle. In the manual ritual, cuts of meat and fat are removed on special tables (16), washed with tap water, using a shower-scraper, goats and carts for washing and flowing around the skins.
At low-power meat processing plants, fat is removed on a log for skinning pork skins (17). To soften the pile, the skins are moistened with tap water, folded "into a fish" with the wool outward and stacked up to 30 skins in racks for 30-40 minutes.
Soaking and partial removal of bulk can be carried out with running water in washing drums (18).
The washing drum is made of stainless steel. It is equipped with two bands resting on four supporting rollers, and one band carrying an sprocket, which receives rotation from an electric motor through a worm gear and chain. From the end sides, the drum is closed with annular bottoms, which increase its rigidity. On the one hand, the bottom excludes the free exit of skins at the lowest position of the drum. The skins are given out with fists (42 pieces, section 100x100, height 200 mm), mounted inside the drum along a helix. The fists are also designed to turn the skins over and move them along the axis of the drum.
Recirculation of water used for washing and softening bulk is provided. Two pipes are installed inside the drum: for the supply of clean water from the pipeline, intended for the final washing of the skins before they are issued from the machine, and for the supply of recirculating water used for locking the skins.
Table-rack for washing paired skins (GIPROmyaso design) is a gable wooden cover made of boards 25 mm thick, which are fixed with nails on four racks. Each post is made up of 75 mm thick main beams and triangular profile ribs. The main ribs and beams are interconnected by five dowels of trapezoidal section. The top of the table is covered with stainless steel sheet 1 mm thick.
Two perforated pipes with fans are mounted above the table at a height of 700 mm. The holes on the pipe (27 pieces with a diameter of 2.5 mm) are arranged in three rows symmetrically at an angle of 30 "on a section 800 mm long. The overall dimensions of the table are 2748x2000x430 mm, weight - 345 g.
The table for washing and cleaning bulk skins (cattle) is a convex lid supported by six legs, which are connected by gussets to the lid frame. The frame of the cover is made of a corner, on the shelves of which pine boards 40 mm thick are fixed. The top of the table top is covered with a 1 mm thick stainless steel sheet. The end walls of the frame are covered with shields made of sheet steel 4 mm thick. These shields give the required rigidity to the frame. The legs of the table are made of pipes equipped with threads, onto which the support bodies are screwed, allowing you to change the height of the table. Overall dimensions of the table are 2300x1800x1000 mm, weight 212 kg.
Removal of bulk from the skins of cattle is also carried out on a skinning machine with a working passage width of 3200 mm with blunt knives or on a continuous bulk machine. For processing, the skin is placed on the feed roller of the machine with the wool up and the rump first so that it lies on the shaft without wrinkles. Then turn on the car. After processing the first half, the skin is again fed into the machine with a turner forward and the pile is removed from the second half. The bulk can also be removed once by placing the skin in the machine with the rump forward and holding it by the bangs.
During the operation of the machine, the pile is washed off the skin with a continuous stream of water that enters the knife shaft and is removed into the receiver.
The required degree of pile removal (without skin damage) is set by adjusting the gap between the pressure and knife rolls.
At the end of the work it is necessary to turn off the electric motor, make a complete cleaning of the bulk machine and the workplace from dirt.
Machines MM-3200 and MM-2M can be used both for rituals and for removing bulk. The difference lies in the fact that the knife shaft of the mezdrial machine is equipped with sharp knives, and when cutting bulk - blunt ones.
To intensify and automate the processes of sanitization, bulk-cutting machines of the through-type type (19) have been developed, in which pre-wetted skins are moved with the skin side outward over three pairs of cleaning rollers.
Skin processing is carried out in the following sequence. The skin is fixed with clamps on the feed conveyor with the hair down, then it is moved by the conveyor through the working area above the shafts with teeth located in it at an angle to the longitudinal axis of the feed conveyor. To improve the removal of bulk in the working area from below, water is supplied to the wool surface of the skin under a pressure of 0.15-0.3 MPa. This technology requires additional washing of skins - cleaning of the skin surface, after which the skins are squeezed on special devices with rolls from excess moisture, or they are lined to drain moisture.
It is allowed to remove pile manually on a wooden block, the outer semicircular side of which is smoothly planed and covered with non-corrosive metal. The deck is set at an angle of 45-60 in metal trays to collect the knocked down bulk. The skin is laid on the deck with the wool up, the rump down. The pile is removed with the help of a dead end, which is moved along the contaminated areas of the skin in the direction of the hair.
In small-capacity meat processing plants and slaughterhouses, to facilitate manual labor when removing bulk, bulk planers are used, the main working body of which is knife shafts, which, as a result of rapid rotation, knock bulk from the skin. The planer is attached to a suspension cable, which has a counterweight on the opposite side.
The skin is attached to the table with a clamping bar. They lower the planer onto the skin, turn on the electric motor and move the planer away from themselves forward through the bulk places. The return of the planer to its original position is carried out in an elevated state. The blades of the knife shaft must be blunt to avoid possible damage to the front layer of the skin. The distance from the knives to the supporting surface of the planer skis should be 2-3 mm.
When removing bulk, its scattering is not allowed. As it accumulates, the bulk is removed from the receiver. When processing skins, it is necessary to ensure that their skin side is not contaminated.
For a complete cleaning of the skins after processing on bulk racing machines, they are washed in inclined washing drums or longboats, as well as under a shower.
Bulk can be removed from the surface of the skins on centrifugal machines. At the same time, for best removal dirt from the skins, the inner surface of the machines must be equipped with corrugated elastic-flexible or elastic elements. This technology makes it possible to remove from the skins not only the pile itself, but also other contaminants located both on the wool and on the skin surfaces of the skins.
Soaking bulk on the skins of cattle in solutions of detergents is carried out as follows:
Prepare a solution consisting of 980 kg of water, 10 kg of table salt, 10 kg of soda ash. Not more than 500 kg of skins are loaded into the container until completely immersed and kept without stirring for 15-30 minutes. The temperature of the soaking solution is maintained between 15 and 35°C. The bulk soaking solution is used repeatedly during one shift. Before the next change, the container is washed with tap water, removing impurities.
Bulk is removed on centrifugal machines with a modified working area for bulk cutting. 1-2 skins are loaded into a centrifugal machine, running water is supplied (at a temperature of 15-35 ° C, and then it is turned on). Skins are washed for 1-3 minutes until the pollution of the washing water stops, after which the water supply is stopped. Then, for 30-60 seconds, the skins are squeezed out of excess moisture in a centrifugal field, after which they are automatically unloaded from the machine and transferred for conservation.
30 2-3 1000 2,6 13
1440X1390X1360 850
Bulk can be removed on G6-FTSS (MOS-ZS) centrifugal machines, having previously isolated the electric motor, which prevents it from flooding with water.
Before canning, bulkless and bulk-cleaned raw hides are dressed from cuts of meat (except for "magpie") and weighting agents. In addition, the mane is cut from horse skins. From the skins of cattle, the head and tail parts removed in violation of the requirements of the standard for raw hides are removed. Subcutaneous fatty tissue is removed from pork skins. The surface burdock is removed from the sheepskin, cuts of meat and fat with a thickness of more than 3 mm.
The rite of skins from cuts of meat and fat is carried out on skinning machines or manually. Large skins are tied on machines with a passage width of 3200 mm, pork 2200, small cattle 1600-1800 mm.
Cuts of meat and fat are removed from the skins with sharply sharpened knives of a rapidly rotating knife shaft. The gap between the knife and pressure rollers of the machine is set in such a way as to ensure the removal of weighting agents in accordance with the requirements state standard for raw leather.
The skin is fed to the feed roller of the machine with the skin side up. First, one (back) half of the skin is processed, then the other (front).
When manually removing cuts, the skins are spread on the table with the wool down. The worker, holding a knife in one hand, with the other raises a section of the skin near the cuts in such a way that the area on which there are cuts of meat and fat is on weight, and cuts them off. The rite of skins can be done with a skin or a scythe on a block upholstered in non-corrosive metal. There should be a container with warm water at the workplace for washing tools. Change the water as it gets dirty. The removed cuts are collected in special boxes.
Removal from the skins of pigs subcutaneous fat, as a rule, is produced in the workshop for slaughtering livestock and cutting carcasses, since fat is sent for food purposes. This operation is carried out on mashing machines or manually. Before skinning pork skins on machines, in order to avoid damage, a cut is made in the rump along the ridge line: up to 8 cm on small, up to 12 cm on medium and up to 15 cm on large skins.
The ritual of pig skins is done by hand in the same way as the skins of cattle. Pork skins (except for boar skins) should have a uniform thickness over the entire area due to a layer of fat on the floors, the residual amount of which should not exceed 6% of their mass.
Determination of the number of cuts of fat on pork skins is carried out by external examination. At the same time, if an excessive amount of fat is detected, the entire batch of raw leather 60 is subjected to a control check for the content of excessive fat cuts.
The skins selected for testing, after shaking out the salt, are processed on a skinning machine. If the amount of fat on pork skins during their check exceeds the established norm by more than 2% of the mass of the skins of the batch, then the entire batch is sent for additional testing. The subcutaneous fat collected in the skin-canning shop is used to produce technical fat.
On skinning machines, it is possible to process sheepskins with surface burrs and cuts of meat and fat with a thickness of more than 3 mm.
Sheepskins that require rites along the hair and the mezra are processed first along the hair and only after that along the mezra. The removal of surface burrs from the hair is carried out on machines with blunt knives, and the removal of cuts of meat and fat is carried out on machines with sharp knives. Sheepskins with the preservation of subcutaneous tissue (mezdra), as well as cuts of meat and fat less than 3 mm thick, are considered properly dressed.
It is not allowed to process woolen sheepskins, sheepskins with bulk, rolled burrs, sores on the leather fabric, signs of hair flow, the presence of tears and holes, fur sheepskins with skinny leather fabric, sheepskins on the mezra in the presence of burrs.
It is not allowed to remove cuts of meat and fat on the deck from sheepskins.
Free Expertise. We conduct a preliminary assessment online. To do this, you should refer to our email [email protected] several photos showing the product from different angles. Attach to them detailed description, and based on the information received, we will tell you the approximate value of your property. Our specialists will be able to name a more exact amount after examination in the office. Any evaluation is free of charge.
Quality of service. We invite you to our offices, which are open from 10:00 every day without days off and holidays. We have competent and friendly specialists who are ready to give you any explanations on the evaluation of products.
Professionalism. Experts evaluate objectively, that is, taking into account all the important parameters that may affect the final cost of the product. We have an extremely transparent and understandable algorithm for calculating the cost.
Profitable offer. The purchase of fur in Moscow is carried out by us promptly, expensively; money is paid immediately upon completion of the transaction.
Additional services. In our online store you can make profitable purchases of various categories of goods. The catalog contains antiques, fashion Jewelry, silverware, branded watches and much more. All goods are checked for compliance with the declared characteristics by our experts, while their cost is several orders of magnitude less than their market price.
Types of fur products
In our pawnshop you can rent:
- fur coats;
- sheepskin coats;
- vests;
- coat;
- poncho;
- capes;
- sheepskin coats;
- hats;
- fur bags;
- mittens;
- blankets, etc.
We accept products that are made from mink, chinchilla, sable, broadtail, arctic fox, fox or rabbit. Buying fur is expensive if things are kept in good condition and have not lost their relevance.
How we are working
- Our pawnshop near metro station "Babushkinskaya" is open every day at any convenient time.
- The expert sets the price of your product. This will take no more than 10 minutes.
- We conclude a sales contract with you. The paperwork will take another 10 minutes.
- You immediately receive the entire amount in your hands. In our pawnshop, fur is bought in Moscow at a high price for cash.
Admission conditions
- To sell us a fur product, you only need a passport. However, the presence of certificates or other documentation can increase the cost of a fur coat.
- We cooperate with clients who have reached the age of majority.
- Our pawnshop accepts different kinds furs, but it is better to check with our managers if we are ready to buy your property.
- During the examination great importance has how much the skins of the animal from which the fur coat is made are valued. Obviously, sable is more expensive than silver fox. However, other parameters are also taken into account: brand, relevance, and so on.
What determines the purchase price
The examination of fur products takes into account the following parameters:
- type and color of fur. For example, the cost of a white fox fur coat is higher than that of a black fur coat;
- condition. This is an important parameter that sometimes decides everything. If the thing is worn, it will not be accepted anywhere. Conversely, a new fur coat without defects will be very expensive;
- year of manufacture, model and brand. Items from the latest collections of eminent designers are especially appreciated. A used product can also be sold profitably if it remains relevant. Style and original design solutions also matter;
- the length of the thing. The more skins were used to make clothes, the higher it will be valued.
We have an online calculator on our website that will calculate for you the approximate cost of the product, taking into account these and other parameters. You can also consult with our specialists by phone.
How long does it take to sell out?
The professionalism of our experts allows us to evaluate the product in just 10-15 minutes. The peculiarity of this procedure is that the expert needs to take into account many parameters: product dimensions, presentation, manufacturer, and more. This is why fur items can take longer to value than jewelry.