Silicone heat resistant mat. Silicone mat for soldering with magnetic inserts. Main features of the soldering mat
m. Kozhukhovskaya- Self-delivery is carried out after confirmation of the order. Specify the terms of shipment of goods from our operators by phone or you can wait for a call from our specialists by placing an order on our website.
Please note that the order is kept in reserve at the pickup point for 48 hours.
Please call us if you would like to extend the shelf life of your order.
Address: st. Petra Romanova, house 6, entrance from the corner of the house, to the right of the Bosch shopping center
We work: Mon - Fri 09 - 21, Sat 11 - 19, Sun - day off
? Moscow- Tomorrow after 13:00 More than 10 pcs.
m. Dostoevskaya- Self-delivery is carried out after confirmation of the order.
Same day delivery times, subject to stock availability.
If the product is not currently in stock at the pickup point, you can always place an order and receive it in 2-3 days. It will be sent from the Moscow warehouse, as soon as the order arrives, you will be immediately notified.
Address: st. Driving around, house 1
We work: Mon - Fri 12 - 20
? Saint PetersburgDelivery is carried out the next day after placing the order.
You can receive your order in Moscow at any address within the Moscow Ring Road for 330 rubles or
Arrange courier delivery outside the Moscow Ring Road (up to 10 km + 390 rubles), then 30 rubles. for 1km.
Order express delivery on the same day in Moscow for 590 rubles. Delivery is carried out on the same day, when ordering before 18.00.
Delivery is carried out only to the home address or to the office. We do not deliver orders on the street, in the subway or at railway stations.
? Moscow - only 330 rubles.today after 12.00
If the product is in stock in St. Petersburg, delivery is carried out on the next business day after placing the order.
If the product is not currently in stock at the pickup point, you can always place an order and receive it in 2-3 days with our courier.
You can receive your order in St. Petersburg at any address within the ring road for 330 rubles or arrange courier delivery outside the ring road (up to 10 km + 390 rubles), then 30 rubles. for 1km.
Delivery is limited inside in the South-West to Pionerstroy Street, in the North-West to Shuvalovsky Prospekt.
? St. Petersburg - only 330 rubles.You can receive your order anywhere in the Russian Federation or in the CIS countries.
Delivery by courier EMS Russian Post or Transport company SDEK.
Shipping cost 590 rub. After sending, you will receive a tracking number to track your package. For buyers from nearby countries, as well as distant regions of the Russian Federation (EMS tariff zone 4 and 5): Ukraine, Kazakhstan, Belarus, Uzbekistan, Azerbaijan, Georgia, Czech Republic, Latvia, Lithuania, Estonia - please choose only the express delivery method for 590 rubles . The parcel will be sent by Russian Post. Shipments to other countries occur only by the delivery method for 590 rubles.
Delivery by Russian Post.
Shipping cost 290 rub. Receiving an order at the nearest post office. Please remember to include your full name and full shipping address when placing an order. After sending, you will receive a tracking number to track your package.
Please note that the transport company does NOT work on weekends and holidays. Orders placed on Friday before 3:00 pm will ship on Monday, and orders placed after 3:00 pm on Tuesday. Shipments to the regions of the Russian Federation occur 2-3 times a week.
? To the regions of the Russian Federation - from 290 rubles.From 2-12 days
- from 1-7 days.
The quality of any work depends on the conditions of its implementation. The presence of a soldering mat greatly simplifies the process, makes it convenient and enjoyable.
Such products appeared on the market relatively recently. It is made from modern high-quality materials that ensure the safety of soldering.
The main requirement for bedding on the desktop is heat resistance, non-slip, and hygiene. There are several types of materials that can provide the necessary conditions. After testing, it turned out that silicone rubber turned out to be the most suitable for soldering.
Silicone refers to organosilicon polymers. They have a combination of properties that have provided the material with immense popularity.
Silicone mat for soldering is characterized by the following advantages:
- resistance to high temperatures;
- convenient density for use;
- lack of surface slip;
- high wear resistance;
- chemical inertness;
- wrinkle resistance;
- the possibility of easy cleaning;
- workable dimensions.
There are several standard sizes of pads for soldering on the desktop. Usually, the thickness is 4mm or 5mm. There are smaller sizes on sale, for example 28x20 cm.
A slightly larger heat-resistant soldering mat with dimensions of 35x25 cm is in demand. Each manufacturer can vary the geometric parameters.
Heat resistance
The response of the mat material to local heating delights users. Manufacturers indicate an allowable temperature of 500 ° C.
Practitioners test heat resistance in their own way. It is reliably known that touching with a hot soldering iron does not leave marks on the coating. At the same time, there is no smoke, smell; foci of smoldering are not formed. The heat-resistant material is not subjected to deformation under the action of a heated soldering iron tip.
Some particularly enthusiastic testers heated the material with an industrial hair dryer, bringing the temperature up to 600 ° C. When soldering, powerful thermal effects are excluded. This is above the maximum value allowed by the manufacturer.
The carpet has withstood this heat. After cooling, no deformations were found in this place, only a bright spot remained. It was easy to wipe off with your fingers.
cleaning
It's nice that the pad does not slip on the surface of the table. The hand of the master is well fixed on the mat, which allows you to concentrate and accurately perform delicate work.
When soldering, it is impossible to exclude the ingress of drops of solder, flux, molten metals onto the working surface. All this is easily washed off after work with water.
Cleaning should be carried out after the complete completion of work and cooling of all drops. It is advisable to use warm water.
The antistatic mat does not attract dust particles, it is not electrified. Soldering can be done in synthetic or wool clothing. The antistatic layer eliminates the appearance of sparks, crackling and slipping of the sleeves on the surface.
Additional details
Convenient varieties of rug with cells for small parts, screws. The depth of the niches is 3 mm. They are numbered, which makes soldering very easy. On the sides there are cavities for storing parts with large sizes. The depth of these niches is usually 2.5 mm. A ruler with a division scale convenient for visual perception is noticeable along the entire length.
Soldering is a responsible job. A poor-quality connection of one part will make the operation of the equipment as a whole impossible. You should focus on the implementation of the process, not be distracted by the little things.
This can be done with a high-quality soldering mat purchased from responsible suppliers. The purchase must be made after checking the documents from the manufacturer.
There are many fakes on the market that are similar in appearance. A counterfeit product will not be able to demonstrate the properties required for soldering.
During work with a soldering iron, it is imperative to protect the table. At any moment, a drop of hot flux or solder can fall from the tool and destroy your furniture. Often ordinary sheets of paper or cardboard are used for protection, but in the modern world it has long been
We thought of an interesting and functional thing - a silicone mat for soldering. It will help you to keep the table surface in perfect condition.
Main features of the soldering mat
- The rug has compact dimensions - 350x220 mm.
- The main material is silicone.
- Manufacturers claim that this repair and soldering mat is resistant to high temperatures - 500 ° C.
- Easy to feel with detergents and a soft cloth.
- Resistant to aggressive environments and all types of solvents.
- This mat is easy to store and rolls up easily.
- Available in four colors (black, white, gray and blue).
- It is a good partner for a hair dryer.
- The depth of the cells is from two to two and a half millimeters.
- There is a special ruler on the mat itself.
- The thickness of the soldering mat is four millimeters.
How to use an antistatic soldering mat
Often during the assembly of any structures in which a soldering iron is involved, small parts or capacitors roll off the surface of the table. When using a silicone heat-resistant soldering mat, this problem is easily solved. It contains special cells of different sizes for storing all the necessary parts. It is very convenient, small elements do not slip and do not roll off the work surface.
Just place a heat-resistant soldering mat on the table surface before starting work.
A number of rug tests were carried out.
- The soldering iron was heated to three hundred degrees Celsius, and small droplets of solder were left. There were no obvious defects after the procedure.
- A simple sheet of paper was placed under the surface of the mat to check how manipulations with the soldering iron are reflected on the surface of the table. We heated the tool to a high temperature and tested the mat. There are no marks left on the surface of the paper.
- On the surface of the silicone mat for soldering with aliexpress, tin was heated with a building hair dryer at a temperature of about five hundred degrees Celsius. During the manipulation, the surface of the material was slightly swollen, but after cooling it returned to its original state.
- All the soot that formed on the rug after the tests was washed off with simple alcohol without much difficulty.
- Since the mat is made of silicone, dust or small debris will stick to it during operation, but it can be easily removed with plain water. After cleaning, the rug looks like new.
Below is a video of the mat being tested.
Where can I buy silicone mat for soldering
Silicone mat for soldering can be bought at https://ru.aliexpress.com. The price for such a thing is acceptable - from nine to twelve US dollars. You can try to search other online stores and buy a heat-resistant soldering mat at a discount.
From all of the above, we can conclude that this is a very simple thing. At the same time, it is convenient and practically necessary for people who perform various work with a soldering iron. And small cells for small parts and elements are just salvation. Such rug does not roll down and does not slide on a table surface. Yes, and working on it is much more pleasant than on an old, dirty, burnt board.
ALL ORDERS IN THE STATUS "WAITING FOR PAYMENT" WILL BE AUTOMATICALLY CANCELED WITHOUT PRIOR NOTIFICATION AT THE END OF THE DAY.
In our online store, the price of goods indicated on the pages of the site is final.
The procedure for payment by electronic money, bank card, from a mobile account:
- After placing an order, your order will be placed in your personal account with the status " Awaiting verification"
- Our managers will check the availability in the warehouse, and put the goods you have chosen in reserve. This changes the status of your order to " Paid". next to the status " Paid"link will be displayed" Pay", by clicking on which you will be redirected to the page for choosing payment methods of the Robokassa website.
- After choosing a method and making payment for the order, the status will automatically change to " Paid". Further, as soon as possible, the goods will be sent to you by the delivery method selected during the ordering process.
1. Cash payment
In cash, it is possible to pay for the goods you bought to the courier (delivering your goods), or in the store (for pickup). When paying in cash, you are given a sales receipt, cashier's check.
ATTENTION!!! We DO NOT WORK with cash on delivery, so payment upon receipt of the postal parcel is not possible!
2. Payment by bank transfer
For legal entities, we have provided the opportunity to pay for purchases using a bank transfer. In the process of placing an order, select the payment method cashless payment and enter the data for invoicing.
3. Payment via payment terminal
ROBOKASSA - allows you to accept payments from customers usingbank cards, at any electronic currency, using servicesmobile commerce(MTS, Megafon, Beeline), payments viaInternet bankleading banks of the Russian Federation, payments through ATMs, throughinstant payment terminals, as well as usingiPhone apps.