Pzm series houses, apartment layouts with dimensions. Typical series of houses P3M Project of a series of houses p 3m
Number of sections (entrances): 2-6
Number of floors: 8-17, the most common options are 14, 17
Ceiling height: 2.64 m.
Elevators: cargo-passenger 500 kg. and passenger 350 kg.
Balconies: loggias and / or balconies in 2-, 3- and 4-room apartments of houses of the P-3M type series, also bay windows above the 5th floor. Since 2002, balconies and loggias have been glazed, double-glazed windows have been installed on the windows
Number of apartments per floor: 4 (in separate buildings - 6)
Years of construction: from 1990 to present. time
Areas for the construction of panel houses of the P-3M type series in Moscow: Zhulebino, Lyublino, Maryinsky Park, Northern and Southern Butovo, Zyuzino, Belyaevo, Yasenevo, Ramenki, Novo-Peredelkino, Kuntsevo, Mitino, Sev. Tushino, Khovrino, Sviblovo, Marfino, etc. In the Moscow Region, new buildings of the P-3M series have been built / are being built in the cities: Khimki (Yubileiny microdistrict, Novokurkino microdistrict), Mytishchi (Yaroslavsky microdistrict), Lyubertsy (Krasnaya Gorka microdistrict, microdistrict Lyubertsy Fields), Krasnogorsk (microdistrict Pavshinskaya Poyma), Podolsk (microdistrict Grasshoppers), Odintsovo (microdistrict Novaya Trekhgorka - Kutuzovsky)
Number of houses built in Moscow: about 100, in the Moscow region (including those under construction) - about 50
Areas of 1-room apartments: total: 35-38 sq. m., residential: 14-18 sq. m., kitchen: 9.1-10 sq. m. There is also a small-sized modification (P-3M-6) with footage 34 / 14.3 / 7.4
Areas of 2-room apartments: total: 53-54 sq. m., residential: 32-34 sq. m., kitchen: 9.1-10 sq. m.
Areas of 3-room apartments: total: 74-85 sq. m., residential: 43-50 sq. m., kitchen: 10.1 sq. m.
Areas of 4-room apartments: total: 91-100 sq. m., residential: 63-66 sq. m., kitchen: 10.1 sq. m.
All rooms in the apartments of houses of the P-3M series are isolated. Corner 3- and 4-room apartments have dark rooms
Bathrooms: separate, bathtubs: standard, 170 cm long.
Garbage chute: with a loading valve on each floor
Cooker type: electric
Walls: external reinforced concrete three-layer panels (concrete - insulation - concrete) with a total thickness of 30 cm. Transverse reinforced concrete inter-apartment walls 18 cm thick, longitudinal inter-apartment and inter-room reinforced concrete panels 14 cm thick. 14 cm
Bearing walls: all inter-apartment and most interior
Type of sections (entrances): end, row (row) and rotary (corner)
Number of steps in the section (entrance): 8, step width (distance between two adjacent load-bearing walls, span width): 300 cm, 360 cm.
Facing, plastering of external walls: no
External wall color options: white with beige, light green, blue, pink, orange, brown
roof type: flat
Distinctive features: houses of the P-3M type series, in contrast to the basic P-3 (built from 1975 to 1998), have 3-layer outer walls with increased thermal insulation and rounded balconies. Interpanel seams are additionally insulated and plastered. There are practically no structural differences from the basic P-3 series. Since 2002, windows in houses of the P-3M series have been glazed with 2-chamber double-glazed windows.
Other advantages: in the apartments of houses of the P-3M series there are built-in wardrobes, mezzanines; in case of fire, an automatic smoke exhaust system is activated. All double-glazed windows in houses of the P-3M series, except for bay windows, contain vents
Disadvantages: limited options for redevelopment
Manufacturer: DSK-3 (part of the PIK Group)
Designer: MNIITEP (Moscow Research Institute of Typology and Experimental Design)
The Olympic Village-1980 in Moscow (residential sector) consists entirely of standard panel houses of the P-3 series, which was taken as the basis for the design of the typical P-3M series in the late 1980s.
Modification P-3M-6 was created in the mid-2000s. for the resettlement of residents of demolished dilapidated and five-story housing stock. On each floor there are 6 apartments of reduced footage
Apartments in new buildings of the P-3M series are often sold with a fine finish
DSK-3 is the founder of multi-storey large-panel construction and one of the largest construction organizations in Moscow.
- Manufacturer - DSK-3
- Designer - MNIITEP
- Years of construction - from 1997 to the present
- Architects: Kan V.V., Rozanova V.N., Krayukhina I.N.
- Design engineers: Kozitsyn Ya.E., Mylnikov S.A., Vasilkova N.P.
The plant was established in March 1964. During the thirty-year period of operation, DSK-3 mastered the production and carried out the construction of eight different series of residential buildings. Since 1997, the plant has switched to mastering the production of residential buildings of the modified PZM series. Release since 1998 residential buildings of the PZM series carried out to the full extent of the plant's capacity. The production capacity of the plant is 360 thousand square meters. m of the total area of residential buildings per year with the development in the future up to 500 thousand square meters. m total area. Projects and design documentation for industrial products necessary for the construction of residential buildings are developed by design workshop No. 3 MNIITEP with the involvement of specialized engineering departments of the Institute. The main architectural, planning and design advantages of modernized residential buildings PZM series are: - the presence of straight and rotary 9,16,17-storey block sections and various types of blocking, allowing to expand the town-planning possibilities of the series; - a set of apartments from one-room to four-room; - application of bay windows, loggias, balconies, panels of external walls with a relief pattern for solving the architecture of facades, new design of entrances to the section, etc. The following is planned for the future: - mastering the series PZMsh, which is a further modification of the PZM, with the introduction of a step of 4.2 m, improvement of apartment layouts, facade architecture, etc.; - development of a single-section tower-type residential building for use in the existing building of the city; - mastering the production of structures of the first non-residential floors with a height of 2.8 and 3.3 m; - further expansion of the range of block sections, taking into account the possibilities of their various interlocks, including those with height differences.
The layout of houses in this series is considered one of the most successful among panel houses. A distinctive feature of the P-3M series from P-3 is the improved technology for manufacturing the outer walls of the house. In houses of the P-3M series, the exterior panels are three-layer with additional insulation. The advantages of houses of the P-3M series in comparison with other panel houses: increased thermal insulation of external panels, the presence of 2 bathrooms in four-room apartments, relatively spacious kitchens, isolated rooms and the presence of an automatic smoke exhaust system.
Since 2002, houses have been built with the installation of double-glazed windows with increased energy efficiency.
Since 2010, the facade surface of external hinged three-layer slabs has been lined with finely dispersed tiles.
The houses of this series, due to the relative cheapness of production and construction in comparison with other series and monolithic buildings, were often built as social housing. Apartments in such houses are rented already completed. The obvious disadvantage of the series is the fact that almost all the walls inside the apartments are load-bearing and it is almost impossible to change the layout of the apartments in any way to suit your specific needs. In fact, only bathroom partitions are non-bearing.
Building construction
- Stairs: Prefabricated reinforced concrete, smoke-free with a common balcony
- Garbage chute: with a loading valve on each floor
- Ventilation: natural exhaust, blocks in kitchens and bathrooms
- Exterior walls: Three-layer panels with effective insulation 300 mm thick.
- Internal walls: Transverse - prefabricated reinforced concrete panels 14cm thick, longitudinal - prefabricated reinforced concrete panels 18cm thick.
- Interior partitions: rolled gypsum concrete panels 80 mm thick
- Interfloor floors: Reinforced concrete hollow-core slabs 140 mm thick per room, supported by internal load-bearing walls
- Bearing walls: reinforced concrete 140 and 180 mm thick
- roof type: flat
Advantages and disadvantages
Advantages: high quality control of parts for production - good quality of finished houses.
Houses of the P-3M series are a modified version of the P-3 (from 1975 to 1998.) and were often built as social housing with additional insulation of the outer walls. Since 2010, two modifications have been developed on the basis of the series: P-3M-7/23 - a modification with an increased (from 19 to 23) number of floors, a third elevator and increased areas of apartments and P-3MS - a "social" modification - with the same the width of the rooms and with more modern facades.
The color scheme of the external walls is varied: white with beige, yellow, light green, blue, pink, orange, brown. Homes have been tiled since 2010.
In houses of the P-3M series, the number of floors varies from 8 to 17. The first floor can be residential and non-residential. Number of entrances from 1 or more. Each entrance has elevators: one passenger with a carrying capacity of 350 kg. And one cargo-passenger with a carrying capacity of 500 kg.
The number of apartments on the floor is 4. All rooms in the apartments of houses of the P-3M series are isolated. In one-room apartments, living area is 14-18m², kitchen is 9-10m²; in two-room apartments 32-34 m², kitchen 9-10 m²; in three-room apartments 43-50 m², kitchen 10 m²; in four-room apartments 63-66 m², kitchen 10 m². Corner three- and four-room apartments have dark rooms/pantries.
The bathroom is separate in all apartments, in four-room apartments there are two bathrooms, bathtubs: standard, 170 cm long. Ventilation - natural exhaust through ventilation blocks (bathroom and kitchen). in two-, three- and four-room apartments there are loggias or round balconies, they have been glazed since 2002, double-glazed windows with increased energy efficiency are installed on the windows. Garbage chute is located on each floor with a loading valve. Stairs without a common balcony.
Internal inter-apartment walls: Transverse - prefabricated reinforced concrete panels 14 cm thick, longitudinal - prefabricated reinforced concrete panels 18 cm thick. External walls - three-layer panels with effective insulation 30 cm thick. Gypsum concrete partitions 8 cm. Ceilings - hollow-core reinforced concrete slabs 14 cm thick. series P-44, the wall between the larger room and the corridor is also load-bearing). The longitudinal wall between the rooms in three- and four-room apartments is load-bearing.
Advantages: they have increased thermal insulation, built-in wardrobes, as well as an automatic smoke exhaust system. Apartments in such houses are rented already completed. Disadvantages: almost all the walls are load-bearing.
Series of panel houses P-3M is not included in the list of demolished, the probability of demolition, even in the long term, is small.
Reasons why you need to contact us when agreeing on redevelopment in a house of the P-3M series
1. You have a desire to do everything according to the law, so as not to get into a difficult situation with uncoordinated redevelopment in the future;
2. You need to sell a property, and the documents do not correspond to the actual state of the property, and you lose money during the sale;
3. You need to apply for a loan secured by your property, but the bank refuses due to the presence of illegal redevelopment;
4. You need to rent a property, and the actual layout does not match the existing documents;
5. You want to be sure that there is no threat to the life of people and building structures when performing repair work according to the layout that you have outlined;
6. You received a fine and an order to agree on the redevelopment or to return the object to its original state;
7. You receive complaints from your neighbors and you want to withdraw the complaints.
8. You want to be calm and not be afraid of fines and inspections in your premises.
Have questions? Call or write, we will help you solve your problem.
Description of the house
Planning solution | Panel residential buildings from middle, end and corner four-apartment sections with 1, 2, 3, 4-room apartments. In three- and four-room apartments, bay windows |
number of storeys | 8 -16 floors |
Height of living quarters | 2.66 m |
Technical buildings | Technical underground and attic for engineering communications |
elevators | Passenger with a carrying capacity of 400 kg and cargo-passenger - 630 kg |
Structural solution | Wall system. External walls - three-layer self-supporting panels with effective insulation, wall thickness - 300 mm. The internal load-bearing walls are reinforced concrete, 140, 180 mm thick. Partitions are plaster concrete, 80 mm thick. Ceilings - reinforced concrete panels 140 mm thick. |
Heating | Central water |
Ventilation | Natural exhaust, through ventilation units in the bathroom and corridor |
Water supply | Cold and hot water from the city network |
Other | Garbage chute with loading valves on each floor |
Placement of apartments in the section
Prices for coordination of redevelopment in the house of the P-3M series
Redevelopment in the house of the P-3M series |
Price for approval |
Request for an individual calculation |
||
---|---|---|---|---|
Project and technical conclusion |
Getting permission |
Obtaining the Act, BTI and extract from the USRR |
||
Redevelopment of the apartment without affecting the load-bearing structures | from 20 000 rub. | from 30 000 rub. | from 60 000 rub. | |
Redevelopment of non-residential premises without affecting the supporting structures | from 40 000 rub. | from 100 000 rub. | from 100 000 rub. | |
Redevelopment of an apartment with an opening in a load-bearing wall | from 100 000 rub. | from 60 000 rub. | from 60 000 rub. | |
Redevelopment of non-residential premises with an opening device in the bearing wall | from 120 000 rub. | from 100 000 rub. | from 100 000 rub. |