Ntv far east satellite tv frequency channels. Self-installation ntv plus
It is difficult to find a house where there is not a single TV. But free channels are one thing, and quite another when it comes to satellite pay TV. The number of paid NTV Plus channels depends on the package that the user paid for. But to get them, you need a little setup, which you can do yourself or by contacting the service for help.
Then you will have the opportunity to watch your favorite films, sports programs, programs of domestic and foreign production, and much more. In addition, it is not difficult to find out which settings are correct for NTV Plus, since the official website has all the instructions, not only general, but also dependent on specific receiver models.
Setting up satellite equipment
A lot depends on how the equipment is configured, including the quality of the signal. Therefore, you need to understand some of the features of installing equipment, if the user decides to save money, and not to order the services of a master who will install and configure everything himself. So here are the instructions to follow:
- Since NTV satellites are located above the equator, in order to catch a signal, you need to point the dish to the south side. In order not to guess where it is, take a compass or use the online compass by downloading this application on your smartphone. What about the tilt angle? satellite dish, then depending on the area and the manufacturer, it should be somewhere between 17-38 degrees;
- Carefully inspect the area to determine if there is interference. It is very simple to do this - if the view in the right direction is good, then everything is fine, and if not, then you need to find another place with a better view;
- Try to fix the plate as firmly as possible so as not to knock down the settings. Every time you get tired of tuning channels, so it’s better to use a reliable bracket and enjoy satellite TV from NTV with pleasure;
- And of course, for any TV channel to work normally, it is important to choose the right cable that will be resistant to weather conditions. Snow, rain and other precipitation will fall on it, so the equipment must be reliable;
- The cable must be connected to the receiver, and the receiver to the TV;
- Even if you don’t know the exact settings, you can catch them yourself by turning the plate in a horizontal and vertical plane until an image appears on the TV screen. When there is a picture, you need to look at the signal reception level - it should be above 50%;
- Log in to the site and get access rights to various packages. The operator helps beginners to fully enjoy broadcasting. There is a small amount on the account of a newly registered user that pays for the broadcasting of a standard package - all that remains is to set up the channels.
When the operation “Registration of the contract” is completed, the access card will activate its work, and within a day a person will be able to see what the provider has prepared for new users.
Setting up NTV Plus channels
At the moment, there are several ways to set up channels from the NTV Plus provider. There are two most popular options.
- An automatic setting that looks like this:
- Enter the menu using the remote control;
- Find the subsection “Search for channels” there;
- Click it and monitor the status of the search. When it ends, all channels will start showing.
- Setting up the TV manually has the following specifics:
- First you need to reset the tinctures. This is done in this way: “Settings” → “Default setting” → “Channels” → “Antenna” → “Satellite settings”;
- The device will require you to enter a password. Feel free to enter four zeros, but only if this option has not been changed;
- After that, when manually searching for TV channels on NTV Plus, you need to uncheck the boxes next to satellites, which are allowed by selecting only the one that NTV Plus works with. In this case, it is EutelsatW4 36E. Sometimes it happens that the service in question is blocked by the tuner or TV itself, and in order to open access, you just need to remove the access card and insert it back;
- Next, you need to configure the transponder. Here are the settings: 12130 R and Lnb levels (low = 0; high = 10750).
When the whole procedure is completed, you can proceed to the final step: Select the transponder and set the command "Search on the network". After that, you have to wait, because the setup takes a long time. But if all the changes were correct, then in half an hour all paid TV channels will work for you.
Setting up NTV Plus Vostok channels
The NTV Plus television company is one of the most popular in Russia, but there were interruptions in broadcasting in the eastern part of the country, which were resolved with the help of a new package and the Express-AT1 satellite. The change took place in 2014, so in 2017, users can enjoy the excellent broadcasting of popular channels and more in 2017 for several years.
If, for some reason, your equipment does not want to receive a signal that comes from this satellite, you can manually search for TV channels after entering the settings. This is not so difficult, since the reconfiguration can also be done manually. TV will start soon standard mode, delighting the audience with a full package of TV channels.
So, in order to access the package, you need to check the satellite settings, and if they are not there, then first enter this satellite, and then fill in the broadcast parameters. Instructions on how to set up channels are simple:
- Open the receiver settings through the remote remote control and the "MENU" button;
- Turn on the search for NTV channels;
- Go through "Settings" - "Installation" - "Password" - "Search Mode" - "Enable";
- Enter transponder parameters: frequency - 12475; polarization - to the left; transfer rate - 27500; broadcasting - DVB-S2; modulation - 8PSK; FEC: 5/6;
- Check the "Level" and "Quality" of the signal. Click on "Search" again;
- Wait for the results and save them.
Setting up LG and Samsung TV
The user will need instructions for setting up Samsung and LG TVs, because these devices have a CAM module, so their work with NTV satellite equipment is slightly different from the standard. However, we will provide simple instructions on how to deal with the problem and set up the hardware correctly.
You can install NTV Plus channels for Samsung like this:
- Enter the menu, and go to the "Broadcast" item;
- Select the antenna "Eutelsat W4 36E", and save the data;
- Enter "LNB Settings", and select the transponder by turning on the DiSEqC mode - off. The lower LNB should be 9750. The upper LNB should be 10750. And the tone switch is 22 KHz;
- Go to manual search to enter channel settings;
- Take the Eutelsat W4 36E satellite and select transponder 11900(V/R) 27500 by setting "Manual search" or "Network search".
The setting for LG looks similar, so you can figure it out without difficulty.
Why Choose Satellite TV Broadcasting? Someone is not satisfied with the number of channels on-air television, someone - the pricing policy of cable companies, and someone generally lives in a region where neither one nor the other is available. The disadvantage of satellite TV is only that initially you need to invest a fairly decent amount, but later the costs pay off with a vengeance!
Setting up NTV plus is quite feasible on its own. For those who are not aware of the principles of satellite broadcasting, we will conduct a small educational program. To receive a high-quality signal to the converter, the dish must “look” exactly in the direction of the satellite. The converter is called the receiver, which is located opposite the antenna mirror. In it, the signal reflected from the mirror is converted into an electrical signal. In the future, the stream enters the receiver (receiver) and from there it is sent to the TV.
Installation
The assembled antenna must be installed either on the wall of the house, or on the roof, or on the ground. In this regard, it is easiest for residents apartment buildings. Since satellite TV is a fairly common thing, it is enough to either climb onto the roof or look around from the window. Surely one of the neighbors already has a dish, and practice shows that the vast majority of them are either Tricolor or NTV, because they broadcast from one satellite.
Accordingly, the NTV plus setting can be done on " visual aid". Just point the antenna mirror in exactly the same way and it will be much easier to get a clear signal. The only thing you need to make sure that the imaginary signal line from the satellite does not cross high-rise buildings and trees.
It is advisable to mount the antenna bracket on the anchor, as strong gusts of wind can disrupt the device. Attach the assembled plate to the bracket.
Setting up NTV plus
Route the coaxial cable from the receiver to the converter. Connect the receiver to the TV and turn on the device. In the corresponding interface, switch to AV mode, and select the satellite in the settings. For the European part, this is EUTELSAT 36A/36B or EUTELSAT W4/W7.
The following steps are the NTV plus setting. It is necessary to direct the dish strictly towards the location of the satellite. Here it is desirable to have an assistant who will inform you about the quality of the received signal. Very slowly, literally by a millimeter, turn the antenna horizontally and vertically, and constantly monitor (with the help of an assistant) the filling of the scales.
For self-installation of NTV plus, it is enough to leave an order "without installing and configuring equipment." You can also contact us by phone. Please note that the cost of the NTV Plus package includes only the price of the equipment.
Installation of a satellite dish NTV plus
Installation satellite dish NTV Plus from the kit to a place accessible without special equipment is produced at the price indicated on the site. However, if you need to install an antenna on a flat roof, the cost will be 500 rubles, for a gable roof from 1000 rubles.
Setting up NTV plus
Setting up NTV Plus includes a set of measures from the correct installation of the dish to the passage of the necessary stages of equipment registration. Having accumulated experience in installing such systems, we are always ready to help you in this process: from a telephone consultation to the departure of a qualified master.
Setting up the NTV plus receiver
Setting up the NTV plus receiver is possible only by registering the subscriber card, and then registering the satellite settings in the system. Our masters are ready to carry out all the necessary operations for registering, connecting, configuring and demonstrating the operation of the equipment. It is worth remembering that the cost of all operations for setting up the receiver is already included in the price of the order!
Service NTV plus
If you have any questions, please contact us in any way convenient for you:
- Get advice by phone;
- Fill out the feedback form on our website;
- Call a wizard to troubleshoot or set up and install hardware.
The cost of NTV plus
Payment for the installation and configuration of equipment is made without any unforeseen costs. Please note that the departure of the master to your order is free. Payment is made only upon completion of all work. Be sure that the price for work and equipment that you receive in the order constructor will be the final one.
The cost of installing and configuring NTV plus
You can order a set of connection services from us satellite television NTV plus to your house or apartment. The cost of the kit is 2,700 rubles, of which 1,500 are allocated for tuning. The list of works includes:
- Installation of a satellite dish;
- Entering, laying and fixing the cable;
- Setting the antenna to the satellite;
- Connecting and configuring the receiver;
- Registration of the included equipment;
- Checking equipment for operability;
- Consultation of the client on existing issues;
- Demonstration of equipment operation.
Installation of NTV plus on the day of treatment
We take into account your wishes, and therefore we are ready, if possible, to install and configure NTV plus on the day of your request. To place an urgent order, you must either contact us by phone or indicate this in the order form at the top of the page.
The cost of NTV plus receivers
The cost of NTV plus receivers is as close as possible to the prices of the manufacturer. By purchasing products from us, you can be sure of the quality of the equipment at the most adequate price. Choose the most suitable receiver for yourself and place an order. More detailed specifications equipment are presented on the receivers page.