Platform update procedure 8.3. Platform installation, platform upgrade. Creating an infobase backup
The 1C platform is partly automated, however, you yourself need to download updates through the official website and install them. The process is quite simple and can be done in two ways. The entire instruction will take you no more than 5-10 minutes, and the experience gained will come in handy and will reduce your time working with updates at times.
How to update the 1C platform: the first way
All swapping is carried out exclusively through the 1C website in Russia: https://portal.1c.ru/applications
At the same time, you must have paid for and registered the current version of the program. If the main configurations were performed by a 1C programmer, then it is better not to change them yourself, because due to little experience with the program, you can harm it or knock down the configuration altogether.
Go to the website above and enter your username and password. They must be indicated on the documentation from ITS, or in your email. Forgetting this data is quite dangerous, but you can restore it using the “Forgot password” button.
After logging in, select the small item “Personal Account” in the header of the site.
You will be redirected to your account settings. First of all, you need to check the registration: if you do not have it, then there is a chance that the system simply will not accept the update and configuration.
When registering your data, you will have to indicate both the organization and its actual address.
Now go back and pay attention to the tab “Typical configurations of 1C for Russia”. Current program updates will be shown here. Click on the title.
All versions of the program, release date, update numbers will be indicated in the table on the site. Typically, the highest row is the most recent update. Click on the title in the "Version Number" column to download.
A new window will provide complete information on the update:
- By the link “New in version” you will find out what changes have affected the program;
- “Update Order” will show you the update installation process;
- “Update Distribution” is the installer you currently need. Click on this link.
Now click on the line “Download distribution kit”.
A save window will appear on top of the browser, agree to all the terms.
Once the installer has downloaded, double click on it. You need to do this from an administrative account, but not from a guest account. The installation will start instantly. Wait for it to finish.
As soon as you see a window with a notification about the end of the installation of the program, it's all over. You can use the updated program.
How to update the 1C platform: the second way
There is another way to update directly through the program, which involves saving a backup copy of the configuration, which will save all your data in case of an error or other problem. It's a little longer, but definitely safer for your business.
First, follow the first few points from the first step of the article: go to the official website and download the updates. Then exit and run the 1C configurator.
Find the “Administration” tab in the program header and click on the “Unload infobase” item. This is necessary to save data.
Then go to "Configuration" - "Support" - "Update configuration".
For users and administrators of 1C programs
How to update the 1C Enterprise 8 platform on the server?
Dmitry Mironov
Today I want to tell you how to update the 1C Enterprise 8 platform in client-server mode.
Before the update, we will need to do a little preparation.
1. View the installed release number on the serverTo do this, launch 1C, open any database hosted on the enterprise server and click on the help icon (or click "Help" - then "About the program")
look at the release number:
In our case, this is a rather old release, version 8.2.15.318.
2. Download the required version of the platformNext, go to the site users.v8.1c.ru(to access the site, you must have a subscription to the ITS and received a login and password).
Click "download updates" in the "Software Updates" section. We enter our credentials and get to the page with available files for download.
Select the item "Technological platform 8.2".
We select the required release (in this case, I install the latest version of the 16 releases, because the 17th version of the platform 8.2 is still somewhat damp).
We select the item "technological platform 1C enterprise for windows"
And click on "Download".
3. Prepare before installation.Before installation, we need to make sure that no one is working in the 1C server databases now. To do this, we go to the 1C enterprise administration console:
And we look at open sessions in all databases
In our case, no one works in the database. If everyone was warned, but someone is not at the workplace, or the user forgot to log out of the terminal session correctly and continues to hang in the database, you can turn it off by right clicking, the "Delete" item
Then you need to make backup copies of all databases (). And be sure to test unpack the backups!
We also need the password of the local user on behalf of which the enterprise 1C server is launched (by default, this is usr1cv82). If you didn’t write down the password at one time, then you can change it in computer management, users.
4. Update 1CUpon completion of the preparatory steps, unpack the archive and run the file "setup.exe"
Now we check which components will be updated.
In the next window, leave everything as default and click "Next". And in a new window, just enter the password from our local user.
schastlivy
Installing and updating the 1C 8.2/8.3 platform for the file version of work.
In order to install / update the 1C 8.2 platform for the Microsoft Windows operating system, we need its distribution kit. Consider the most common installation option for 1C Enterprise. For example, let's take the platform of the software product 1C Enterprise 8.2.19.106. Other versions of the platform are installed by analogy.
Installing / updating the distribution kit of the platform version 1C 8.3 is similar to version 8.2, so this instruction is also suitable for it.
Before starting, you need to download the installation files of the 1C Enterprise platform distribution kit. If there is a subscription to ITS (Information and Technology Support), everything is simple, go to the site users.v8.1c.ru and download the necessary. For basic versions of configurations, ITS subscription is not required. Detailed instructions for downloading the distribution from the site users.
It is also possible to install the distribution kit from the "ITS Supplement" disk. If this installation option is selected, you should pay attention to the date of its release, since the platform must be up-to-date, otherwise the configuration of a newer release simply will not start, giving an error. Detailed instructions for installing the distribution from the disk.
So, the distribution is downloaded, open the folder with the distribution and see the following picture:
We launch the installer file with the name "setup.exe" highlighted in the figure above.
After starting the installation program, a welcome window opens, click the "Next" button
A window for selecting components opens, and the path to the platform files is also specified. It is advisable to choose the first three points. Also, if, on a computer, you plan to use remote access to databases, through a thin client, or a web browser, you need to add a “web server extension module” (Works only with managed applications).
Next, the interface language selection window opens. If you have a Russian-language operating system, leave the default “System Settings”, well, or choose at your discretion:
Next, the installer reports readiness. Click "Install":
The program installs the components we have chosen. We are waiting for the end of the process.
Next, the installer asks if we need a hardware key protection driver? If a “Hardware security key” is used (blue USB device), then the checkbox must be left. If the licenses are software (Envelope with PIN codes), the checkbox can be unchecked. In any case, you can install / remove the driver later, you can read about it. Click "Next":
Further, if everything went well, we see the corresponding window. Click "Finish" and set the configuration:
1. Go to the portal 1c (see instructions "")
3. We are interested in "Technological platform 8.3". We click on this link and get to the page with version numbers.
4. Naturally, we are interested in the latter, that is, the upper one. Again, click on the link and here we select “Technological platform 1C: Enterprise for Windows” (Fig. 1)
rice. one
6. Now in the explorer we are looking for the downloaded file. The distribution file is an archive, so it must be unpacked into a separate folder.
1C platform installation
After unpacking, look for the setup.exe file in the list of files and run it (Fig. 2):
rice. 2
We see a welcome message, click “Next” (Fig. 3)
rice. 3
Selected components are installed (Fig. 5)
rice. 5
The next step is to install the “Protection Driver” (Fig. 6). It must be installed if you have hardware keys, but if the program keys are software, then the checkbox must be unchecked.
This note reviews the process transition from 1C version 8.2 to 1C version 8.3 typical configuration of enterprise accounting, most likely the process described here is suitable for other configurations. In the transition to 1С version 8.3 there is nothing complicated, since the migration process is the most common update 1C 8.2 to version 1C 8.3. Advantages 1C versions 8.3 (platform 8.3, configuration 3.0) obvious - this is the ability to transfer the load from the client to the server, support " Managed Forms" allowed to work in the program in thin and web client mode.
How to switch from 1C 8.2 to 1C 8.3 enterprise accounting
1. Installing the technological platform 1C 8.3 how to install 1C can be read in the article -
2. Update 1С8.2 usually up to the latest version.
Go to the ITS website 1C, to the section for downloading updates for 1C Enterprise 8.3, we find in the list of updates the last posted update to switch from 1C 8.2 to 1C 8.3 and download it, carefully read the ReadMe file, it should contain the minimum requirements for the release of the configuration 8.2
to use the downloaded archive, in order to updates of version 1C8.2 to 1C8.3.
Version of the current configuration 1С 8.2 can be viewed by running 1C Enterprise in normal mode or in configurator mode in the section Reference – About the program.
Knowing to what minimum version you need to update the configuration 8.2 download all updates sequentially using the table to update 1С8.2 to the version we need. The first and next release number from which you can upgrade can be viewed in the table in the column version update.
After we update 1С 8.2 to the desired configuration version.
How to update a typical configuration 1C8.2 or 1C8.3
To update the default configuration 1C launch 1C platform, select the database that we will update and launch 1C in mode Configurator.
Go to menu item Configuration- we click Open configuration if it is not open at startup.
Next, go to the menu item Configuration – Support – Update configuration.
We select the configuration update source, in my case the template is installed in the default directory, so I select the item: Search for available updates (recommended), press the button Further.
Select the search area for update files: check Search current template and update directories, remove Search for updates in catalogs on the 1C website, press Further.
Select the required update and click - Ready!
We read the description of the update and click - Continue update.
In the window New provider configuration press the button OK.
We are waiting for the provider configuration to be updated.
The configuration has been updated. Update database configuration, press - Yes.
We accept changes in the structure of configuration information - button, To accept.
After the update, go to the menu item Service – 1Сenterprise, launch 1C.
Checking the legality of receiving the update - we confirm that the update was received legally and press the button, Proceed.
The configuration was successfully updated.
We update sequentially 1C, in the manner indicated above before receiving desired release.
3. Set the configuration for the transition from 1C version 8.2 to 1C version 8.3, is installed in the same way as updating 1C.
In the configurator mode, create a backup copy of the data , Administration – Unload the infobase and save the 1C filev8.dt.
If users are created in the configuration, then we install an additional role System administrator for transition to edition 3.0, the user under which the update will be performed.
We launch Platform 1C 8.3 with version config 8.2
, to do this, click the change database button and specify the platform version number in the launch options 8.3
, in order to launch the platform 8.3
.
We launch 1C 8.3 in mode configurator, further, we pass - Configuration – Support – Update configuration.
The upgrade process takes a significant amount of time, is more time consuming than installing upgrades, and depends on the size of the database.
When changing the structure of the database 1C warnings are possible, it is better to read them carefully, and if we do not see serious problems, we agree with the processing of the changes.
After updating the configuration, run 1C in working mode, we agree with the legality of the update, and wait for some more time to complete the program update process 1C.
Enterprise Accounting has been successfully upgraded to version 3.0 !
The above actions can be simplified, for this it is enough to run 1C and Service choose - Update to edition 3.0 in this case, the program itself will find the necessary edition to switch to 1C 3.0, we just need an Internet access channel and an ITS subscription with a working login and password to access the 1C site